P.O. Box 794, Quakertown, PA • Phone: 267-424-4493 Fax: 866-602-3410
What is and why do we need to use a Deionized Water Kit?
First off, there are all sorts of dissolved impurities in most tap water today. Think about it, most homes nowadays have water softeners, filters and even ph balancing equipment. This equipment protects the homeowner, his family and also the plumbing system in the home.
Batteries are not as sensistive as our bodies, but they are still an investment and need to be properly maintained. Certain dissolved impurities in standard tap water will corrode the inside of the battery and decrease your battery life and performance.
With a Deionized Water Kit, you can easily and inexpensively remove these harmful impurities. This DW-KIT purifies water prior to going into the battery. This helps to keep the battery in peak operating condition and can extend battery life. In fact, depending on the supply water quality, one cartridge can clean up to 600 gallons before needing replacement.
Each battery in your facility cost several thousand Dollars. Each battery has a set amount of potential. Maintaining proper water levels and using purified water can help you to get the most potential out of your batteries. A small initial investment in a DW-KIT and a watering tool will help protect your battery investment.
How does it work?
Water is passed through a cartridge containing anion and cation resins. These resins remove dissolved impurities from the water. As purified water exits the cartridge, the monitoring light glows. After up to 600 gallons has flowed through the cartridge, the monitoring light will begin to flicker. At this point the cartridge is near exhaustion. When the monitoring light finally goes dark, a replacement cartridge (DW-CAR) is needed to restore the kit to proper working order. The new cartridge threads right into the DW-KIT brackets and is running again in no time. The old DW-CAR cartridge is non-toxic and has no special disposal requirements.
Liquid Precision, Inc. Watering Guns and MFS Floats can be hooked directly up to the DW-KIT for a complete battery filling system.